All France guides

FRANCE · PRACTICAL GUIDE

Slow EV charging: what to check at the charger, and in what order?

The charger says 150 kW but your car receives 42 kW: that reading alone cannot diagnose a fault. Follow this method to identify the relevant limit, record conditions and decide when to contact support.

1. Identify AC or DC and the exact version

Record the connector used and the matching limit in your vehicle handbook. In AC charging, the onboard charger, cable and supply can limit power; on DC, the station does not force the battery to accept its advertised maximum. Hypothetical example: a car limited to 11 kW AC will not receive 22 kW simply because the station advertises it. Comparing 11 kW AC with a 100 kW DC marketing peak mixes two modes. Check model-year options too: the model name is insufficient.

2. Record charge level and temperature

IONITY and Fastned explain that power varies with battery charge level and temperature. A reduction during a session may therefore be normal. Some vehicles support battery preconditioning: follow the handbook, which may require selecting the charger in built-in navigation. A warm cabin does not prove that the battery is prepared. There is no universal charge percentage or outdoor temperature here that can establish a fault.

3. Measure a session rather than just a peak

Record delivered kWh and charging minutes. Fictional example: 30 kWh in 40 minutes means average power of 45 kW (30 ÷ 40 × 60). That is neither peak power nor a measurement of usable battery capacity. Compare the same interval next time, with similar starting and ending percentages and conditions. A full session ending at 100% is not comparable to a claim measured over a short interval.

4. Separate charger, payment and vehicle issues

If charging does not start, record the exact message, charger ID and payment method; check the displayed procedure and contact the operator. If it starts slowly, keep the initial charge level, time, AC/DC mode, any preconditioning and power reading. A second compatible point, used according to instructions and without safety warnings, can help support compare results. One attempt does not establish that the car or network is defective.

5. When to stop and contact support

With a damaged connector, unusual smell or electrical warning, stop testing: follow safety instructions and contact the support number on the charger or your vehicle assistance service. Do not dismantle equipment or force a locked connector. If slow charging repeats at several compatible stations despite manufacturer-recommended conditions, send your session record to the service team. This guide helps document a problem; it does not replace a diagnosis.

6. Check the cost before waiting

Your charging-card app may show a different price from the operator’s direct-payment offer. Before starting, check energy, chargeable minutes, any free allowance, connection fees and parking. The linked calculator shows a fictional example: 30 kWh at €0.45, a €1 connection fee, 10 minutes at €0.10 and €2 parking total €17.50. Allocating an €8 subscription across four identical sessions brings the attributed cost to €19.50, or €0.65/kWh. Replace every assumption with your own offer.

Calculate my euro charging budget

Calculate a session: energy, time, parking and subscription

Sources and approach

AtlasVolt editorial synthesis based on the linked sources. These recommendations are not presented as a road test. Model prices come from the manufacturer records linked on each reference page.

Who prepares these guides?

Report a correction